Search site

Contact

Car diagnostic tools information by obd2tool

https://www.obd2tool.com

Welcome to my blog,here some auto diagnostic tools will be displayed. If you want to know more information,you can visit our official website: www.obd2tool.com.

lovelily750@gmail.com

News

Visitors notice

12/01/2014 07:47
Let your visitors know about news and events on your website as often as possible. You need to keep your website up-to-date so that your visitors will get used to visiting your pages regularly. You can use RSS feeds to deliver new articles directly to your readers.

Website launched

12/01/2014 07:46
Our new website has been launched today. Tell your visitors why you have started a new presentation and how it benefits them. Mention your goals and project advantages. Try to briefly give your visitors reasons why they should return to your pages.

The blog of OBD2 TOOL

2018 New LAUNCH X431 ICARSCAN Auto Diagnostic Tool with 10 Free Software

05/13/2018 11:28
Recently, we will launch the new icarscan, which can download more free software and more full functionality. iCarscan has the same software as the launch X431 PRO3 X431 V+ X431 PAD, etc. It is a system-wide diagnostic tool with special features. The iCarScan (vehicle communication interface) can...

GM TECH2 program DDM, enable comfort opening closing and learn pinch

04/26/2018 16:06
Device to use: GM TECH2 Security via TIS2000! Without this you won’t be able to add anything!!! I bought GM Tech 2 $358 (shipping not included), details: TIS2000 $18 free shipping, from OBD2TOOL Step –by – Step Procedure 1.Go to “Main Menu”, select “Diagnostics” 2.Select one of the...

MB SD Connect C4/C5 software V2018.03 has released

04/22/2018 17:07
MB SD Connect C4/C5 software V2018.03 has released Software display: You can also choose different laptop,for example,EVG7 tablet,Panasonic CF52 Laptop,DELL630 laptop  

Autel Maxisys Elite Programming and Coding

04/08/2018 13:34
Since the introduction of OBD II and leading up to modern Hybrids and EVs, computers and software in cars have been expanding at an exponential rate.In-car software is becoming one of the leading needs for service, and updating software may be the only way to fix some of these...

INPA K+DCAN cable vs ENET cable vs BMW ICOM A2 (icom next)

03/25/2018 22:02
Any cost-effective DIY solution of BMW diagnostic/coding/programming? First you should know which BMW TOOLS you need: K+DCAN or ENET or ICOM A2/ ICOM Next. In summary, It depends on your purpose (diagnostic or coding or programming) and model (Exx or Fxx or others). For...

Tips on how to set up TIS2000 on Windows XP78 64bit or 32bit

03/18/2018 18:36
Guide to installing TIS2000 on any computer: I study via all 39 pages on the gm tech 2 Clone thread nowadays and noticed that a number of people had been obtaining challenges installing TIS2000 on machines operating something other than Windows XP Pro 32-bit. In the following, I am going to explain...

1st what you need to do on you GM tech 2

03/06/2018 20:50
And so, you came to your device, and you hold it in your hands. First of all, after you have made sure that it is intact, no need to go write a review or to complete the transaction, depending on where you bought it. Unpack Tech2 Scan Tool , the first thing we need to insert it in the Tech 2...

How To Activate 2017.12 MB SD Connect C4 C5 Xentry

03/02/2018 16:46
User guide:how to activate 2017.12 MB SD Connect C4/C5 start key Step-by-step ,here you are: Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop. Step2: Select ” SDconnect” Step3: Select ” Configure”. Step 4: Select the icon as picture. Step5: Step 6 and 7 : Step...

DSP3 Mileage Correction ODOMETER CORRECTION

02/20/2018 19:01
Primero conecte la DSP3 Odometer Correction OBD Tool u otro adaptador con su anfitrión, luego encienda el sistema, se abrirá el software. Haga clic en el botón 'ODOMETER' en la ventana principal, verá la ventana de lista de marcas, seleccione hacer como 'BMW' y haga doble clic, la ventana de...

Launch X431 Diagun IV Diagnotist Tool with 2 years

01/31/2018 10:46
Top Reason to choose Launch X431 Diagun IV on OBD2TOOL: 1. 2017 Diagun Latest version : Diagun IV 2. Multi-language, you can change the language by yourself. Language support:...
<< 3 | 4 | 5 | 6 | 7 >>

wiTECH 2.0 Will Not Communicate With Any Modules – All Modules Are Red

08/02/2018 18:00

Theory of Operation:

Below are few different ways communication on a vehicle takes place:

*   Scan tool to the Central Gateway Module (Ex: SGW, TIPM, BCM, etc.)
*   Module to Module
*   Module to Device
*   Device to Module

Communication to the vehicle is established with a scan tool, through the Data Link Connector (DLC) to the Central GateWay Module (CGW) over the Controller Area Network (CAN) Bus.

On this vehicle the Body Control Module (BCM) is the CGW between the high and low speed CAN Bus networks (CAN-C and CAN-IHS); and communicates with the scan tool through CAN C.

13-1

The witech 2.0 Bus architecture of this vehicle operates in a “hub” or “star” style, meaning all of the modules are connected at a central point in the Star Connectors. The terminating resistors for CAN Bus are located in the Star Connectors that are part of the body and instrument panel wiring harnesses. In other CAN Bus architectures a vehicle may operate in a “stub” or “backbone” style, meaning there is a single, main line that connects all modules. The terminating resistors for CAN Bus in the “stub” or “backbone” style are located in 2 separate dominant modules that are placed as far apart as is physically possible. The scan tool becomes another module on the vehicle’s networks by acting as the Master Module of all Bus networks while connected to the DLC  and contributes voltage to the operation of the CAN Bus.

The following vehicle interactions listed below will aid in predetermining the type of vehicle communication that is/isn’t available:

NOTE: If the Hazard Lamps and Headlamps are active, this indicates the BCM is functioning and is most likely not the cause of the CAN Bus fault.

*   Operating the Lock/Unlock button of the FOB with Integrated Key (FOBIK) – When any one of the Remote Keyless Entry (RKE) transmitter buttons of the FOBIK are depressed, the onboard transmitter generates a high frequency RF request signal that is received and validated by the Radio Frequency Hub Module (RF Hub). If the RF Hub determines the RKE transmitter RF request signal was generated by a FOBIK that is valid for the vehicle, the RF Hub relays electronic request messages to the BCM over the CAN BUS to invoke the functions or features associated with the request.
*   Opening a Door – The Door Latches contain Ajar Switches that are hardwired to the BCM. The status of the Door Ajar Switch Sense circuit input is monitored by the BCM, which then sends the proper electronic message to other modules in the vehicle over the CAN Bus.
*   Turning the Headlights on – The Headlamp switch uses a single resistor multiplexed output to control the many functions and features it provides. The switch receives a clean ground from the BCM on a Headlamp Switch Multiplex (MUX) Return circuit. The BCM then reads the switch outputs using an internal pull up on the Headlamp/Fog Lamp Switch Signal circuit to control the exterior lighting functions
*   Turning the Hazard Lamps on – The status of the Hazard Switch is continually monitored by the circuitry within the Instrument Panel Switch Bank in the Integrated Center Stack (ICS). The switch receives battery voltage at all times through a Fused Battery Feed circuit, and a path to ground at all times through the Instrument Panel wire harness. Whenever the Hazard Switch is in its latched and lowered position, the hazard warning system is selected and the switch bank circuitry provides a hardwired output to the BCM. When the BCM receives a Hazard Switch input, it then controls hazard warning system operation and flash rate by controlling battery voltage outputs through high side drivers on the Right and Left / Front and Rear Turn Signal Feed circuits.
*   Honking the Horn – Each Horn has a path to ground at all times through its wire harness connection to an eyelet terminal secured to the body sheet metal. The Horns are controlled by a Fused B(+) output received through a relay within the front Power Distribution Center (PDC) Assembly and controlled by the BCM.

During an ignition cycle, the Auto Scanner Tool CAN C Bus network may go into default mode when communication has been hindered with the BCM. In some situations, when this happens the wipers automatically operate in a delay mode and the Headlamps are activated by the BCM. When the ignition is turned off, the vehicle will exit the default mode and operation of the Wipers and Headlamps will stop. When turning the ignition on again, if the CAN C Bus fault is still present, the vehicle will exhibit a no crank, no start condition; and no scan tool communication response to the vehicle.

Possible Causes:

*   INOPERATIVE SCAN TOOL
*   MANUALLY SELECTING THE INCORRECT YEAR AND/OR MODEL WITH WITECH 2.0
*   DATA LINK CONNECTOR (DLC)
*   DATA LINK CONNECTOR FUSED B (+) CIRCUIT OPEN OR HIGH RESISTANCE
*   DATA LINK CONNECTOR GROUND CIRCUIT OPEN OR HIGH RESISTANCE
*   CAN C (+) BUS CIRCUIT OPEN, SHORTED OR HIGH RESISTANCE
*   CAN C (-) BUS CIRCUIT OPEN, SHORTED OR HIGH RESISTANCE
*   POOR TERMINAL CONTACT OR CONNECTOR CONNECTION(S)
*   STAR CONNECTOR
*   ANY MODULE ON THE CAN C BUS

NORMAL CAN C BUS CIRCUIT VOLTAGE TABLE

*   CAN C BUS LOW (-) : 1.5 – 2.5 volts
*   CAN C BUS HIGH (+) : 2.5 – 3.5 volts
*   Difference Between CAN C BUS (+) and CAN C BUS (-) : 0.5 volt

*   CAN B or IHS BUS LOW (-) : 1.5 – 2.5 volts
*   CAN B or IHS BUS HIGH (+) : 2.5 – 3.5 volts
*   Difference Between CAN B or IHS BUS (+) and CAN B or IHS BUS (-) : 0.5 volt

*   CAN C1 or C2 BUS LOW (-) : 1.5 – 2.5 volts
*   CAN C1 or C2 BUS HIGH (+) : 2.5 – 3.5 volts
*   Difference Between CAN C1 or C2 BUS (+) and CAN C1 or C2 BUS (-) : 0.5 volt

 

https://obd2lily.livedoor.blog/archives/10997122.html