XTOOL X100 Pad2 key reprogram a 2004 Land Rover Discovery 3

Discovery 3 is supported by X100 PAD2/ X100 PAD2 Pro in key programming. Check the Land Rover IMMO function list as below.

It’s not difficult to do key programming, just do it as follows.

Connect X100 Pad2 key programmer to the vehicle via the main cable properly

Turn on the XTOOL tablet to operate

Go to “Immobilization”-> “LANDROVER”

Agree with the disclaimer

Select “Discovery”-> “Discovery 3”-> “Program keys”

Note: you need at least one programmed key.

Then follow the on-screen instructions to operate step by step.

Insert the working key into the ignition and no need to turn on

When it has been programmed successfully, remove it and insert the new key, do not switch ignition on

After the process is completed, test two keys

FYI…

Some customers have successfully tested on other Land Rover car models, also share here with you.

* LR Sport 2009 add Chinese remote key OK
* Ranger T6 2015 AKL, lishi for door lock and X100 pad2 for programming. 2mn done.
* land rover freelander 2 2012 add 1 key
* landrover freelander 2006 add remote it’s ok
* Ranger 2017 Hitag Pro: add key OK
* range rover sport 2012 add key ok
* Disco 4, add smart OK (Hitage Pro)